TheE strings should be facing outwards (or "away from the body") and the rest of the strings should be facing inwards (or "toward the body"). Check that strings are properly set in the notches of the nut of the guitar. Settingthe recommended height depends on guitar type and preference; as you can see on the chart of the gauge. We're going to go for a low action (0.05 on the low E and 0.04 on the high E) measuring from the top of the 12th fret to the bottom of the low E string first and then moving on to the high E string. Morevideo guitar tips: https://zagerguitar.com Thecrown is the exposed part of the fret. When you fret a note, you're pressing the string to the very top of the crown. Like a row of hooks, barbs secure the fret to the fretboard. Barb width determines the width of the fret slot and the tang determines the depth of the fret slot—i.e., how far the fretwire penetrates into the fretboard. Step3: Slowly turn the peg away from you and guide the string towards the inside of the peg box using the index finger of the hand that's not turning the peg. Step 4: While keeping your index finger against the string, turn the peg until the string is fully wound onto the peg. Be sure not to apply pressure here. Thestring slips at the knot in the tuner. The reason is always the same: an improper tying of the knot. You have to untie the strings and do it again - properly. It's good to ensure the windings are close to the string hole on the capstan and also that the windings are parallel. Most important, the method of tying the knot has to be a .

how to fix e string on guitar